DH Instruments PPC2+, Руководство пользователя

Страница: 91 / 166

PPC2+™ Operation and Maintenance Manual
Page 83
©2001 DH Instruments, Inc.
4.4.2 ERROR MESSAGES
The PPC2+ will always reply to a program message while using the classic format. If the
program message is incorrect or contains invalid data, an error number will be returned in the
form <ERR#n> where n is an integer number that represents a specific error. This allows for
easy error trapping by the host computer.
In the enhanced format, each error is placed into the Error Queue as it occurs. The <ERR?>
query can then be used to remove from the queue and reply the text description of each error
that has occurred. If you are using the COM1 port, the Error Queue is cleared each time a
program message (except <ERR>) is received. Section 4.5 explains the details of the
Error Queue. Table 13 is a list of the possible errors numbers and the error description
for each.
Table 13. Error #’s and Descriptions
REPLY DESCRIPTION
ERR #0 “OK”
ERR #2 “Text argument is too long”
ERR #3 “User defined coefficient cannot be 0”
ERR #4 “External device not detected”
ERR #5 “External device improperly configured”
ERR #6 “Numeric argument missing or out of range”
ERR #7 “Missing or improper command argument(s)”
ERR #8 “External device time-out error”
ERR #9 “Unknown command”
ERR #11 “Command missing argument”
ERR #12 “System overpressured” or “overpressure may result”
ERR #13 “Text detected in numeric field”
ERR #14 “User unit not defined”
ERR #16 “Not available with gauge units”
ERR #18 “Command not yet available”
ERR #19 “Not available with absolute units”
ERR #20 “Not available with gauge transducer”
ERR #21 “User device not defined”
ERR #22 “Pressure is not stable”
ERR #23 “Option not available or installed”
ERR #24 “Unit must be vented”
ERR #25 “Transducer out of calibration”
ERR #26 “COM port failed to initialize”
ERR #27 “Internal device#1 time-out error”
ERR #28 “Internal device#2 time-out error”
ERR #30 “Must be on range H3”
ERR #31 “Upper limit is too low”
ERR #32 “Not stable enough”
ERR #33 “Failed to generate pressure”