manualshive.com logo in svg

DH Instruments PPC2+, Руководство пользователя

DH Instruments PPC2+ - это многофункциональный калибратор давления для точного измерения и настройки давления. Скачайте инструкцию по эксплуатации бесплатно с manualshive.com и узнайте, как максимально эффективно использовать все функции этого устройства.

Поделиться
Скачать
background image

PPC2+™ Operation and Maintenance Manual 
 

 

 

 
 

Page 79

 

©2001 DH Instruments, Inc.

 

4 . 3   P R O G R A M M I N G   F O R M A T S  

The PPC2+ program message set is downward compatible with the previous PPC2 program 
message set.  PPC2+ also introduces a new enhanced program message format to support IEEE Std 
488.2 syntax, format, and status reporting.  The user must select whether to use either the original 
“classic” program message format, or the new “enhanced” program message format.  The enhanced 
format is recommended when possible, as the classic format is obsolete.  Selection can be 
accomplished from the front panel (see Section 3.4.4.3) or remotely by using the “MSGFMT” 
program message.  The default is the classic program message format to allow downward 
compatibility with existing host software.  The basic commands are similar for both the classic and 
enhanced formats, but the usage, syntax, format and status reporting are different. 

The PPC2+ enhanced program message format also includes new additional common program 
messages that are required in every device that complies with the IEEE Std 488.2.  These addition 
common program messages are covered separately in Section 4.6.1. 

4.3.1 

CLASSIC PROGRAM MESSAGE FORMAT 

The classic program message format is downward compatible with the previous PPC2 
program message set.  However, several PPC2 functions are not supported by PPC2 and 
neither are their corresponding commands (see DEVICE, DPG, ISO, PPC, HOLD, TOUT, 
TS, CONFIG10).  This format is recommended only if you need downward compatibility with 
older PPC2 controllers.  Each program message sent is also a query.  You can only send one 
program message to the PPC2+ at time.  After sending any program message, you must wait 
for the PPC2+ to reply before sending another program message. This reply will contain data, 
or a numeric error message if the program message was invalid.  You must wait for this reply 
before issuing another program message to the PPC2+.  This insures that the PPC2+

 

has 

completed the program message. Most remote program messages will return a reply within 
500 ms except: 

PR, PRR, SR, ATM, RATE  Up to 2.0 seconds to allow a new measurement. 

The syntax and format used for each program message in the classic mode is listed next to 
the keyword ‘Classic:’ in each program message summary in Section 4.4.4. 

4.3.2 

ENHANCED PROGRAM MESSAGE FORMAT 

This enhanced program message format uses the IEEE Std. 488.2 format, syntax and status 
reporting and is recommended for new applications.  Errors are reported using the IEEE Std. 
488.2 status reporting model.  If an error is reported, the error is put into an Error Queue and 
the “ERR?” query program message can be used to get a text description of the most 
recent error.  If you are using the IEEE-488 port, the service request line can be setup to be 
asserted if this occurs (see Section 4.5.2).  There are two possible program message types 
for every program message.  Each of these two types starts with the same basic text referred 
to as the program message header. 

Содержание PPC2+







































































































































































Отзывы:

Нет отзывов

Похожие инструкции для PPC2+

ODU MINI-SNAP K Series Assembly Instructions preview
MINI-SNAP K Series
Бренд: ODU Страницы: 2
ODU AMC Assembly Instruction Manual preview
AMC
Бренд: ODU Страницы: 6
Staubli CombiTac MA213-11 Assembly Instructions Manual preview
CombiTac MA213-11
Бренд: Staubli Страницы: 12
Allwan Security Quad404LV User Manual preview
Quad404LV
Бренд: Allwan Security Страницы: 24
TMB ProPlex IQ Two 416 User Manual preview
ProPlex IQ Two 416
Бренд: TMB Страницы: 26
Samcon SKDP03-T Mounting Manual preview
SKDP03-T
Бренд: Samcon Страницы: 12
Whirlwind SPC82 Specification Sheet preview
SPC82
Бренд: Whirlwind Страницы: 2
Savant SHA-B5W 00 Series Quick Reference Manual preview
SHA-B5W 00 Series
Бренд: Savant Страницы: 2
ATEQ 6th series User Manual preview
6th series
Бренд: ATEQ Страницы: 7
Enerpac VEP-1 Instruction Sheet preview
VEP-1
Бренд: Enerpac Страницы: 3
Applied Omni 1x10 User Manual preview
Omni 1x10
Бренд: Applied Страницы: 9
RocketFish RF-HG100F18 Quick Setup Manual preview
RF-HG100F18
Бренд: RocketFish Страницы: 2
RocketFish RF-G1300 Quick Setup Manual preview
RF-G1300
Бренд: RocketFish Страницы: 2
ISOUND RETRACTABLE AUDIO CABLE TWIN PACK User Manual preview
RETRACTABLE AUDIO CABLE TWIN PACK
Бренд: ISOUND Страницы: 12
Black Box Multi Quick Check RJ-11 Brochure & Specs preview
Multi Quick Check RJ-11
Бренд: Black Box Страницы: 3
CYP DT-12 Operation Manual preview
DT-12
Бренд: CYP Страницы: 12
MuxLab 100507 Quick Installation Manual preview
100507
Бренд: MuxLab Страницы: 2
MuxLab VideoEase Digital Audio Balun Installation Manual preview
VideoEase Digital Audio Balun
Бренд: MuxLab Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды