DH Instruments PPC2+, Руководство пользователя

Страница: 113 / 166

PPC2+™ Operation and Maintenance Manual
Page 105
©2001 DH Instruments, Inc.
READYCK
Purpose Read or set the ready check flag.
Command
Query
“READYCK 1”
“READYCK?”
Classic “READYCK=1”
“READYCK”
Remarks The internal ready check flag is cleared whenever the PPC2+ reaches a Not Ready
(NR) condition. The “READYCK” query will return the status of this flag. This flag is
set by sending the “READYCK 1” program message while the PPC2+ is in a Ready
(<*>) condition. You can then use “READYCK” program message query at a later
time to determine if a Not Ready (NR) condition has occurred since.
Example
(enhanced)
Cmd sent:
Query reply:
“READYCK 1”
“1” (if PPC2+ condition has stayed ready)
“0” (if PPC2+ condition has NOT stayed ready)
Example
(classic v2.01
& up)
Sent:
Query reply:
“READYCK=1”
“READYCK=1” (if PPC2+ condition has stayed ready)
“READYCK=0” (if PPC2+ condition has NOT stayed ready)
Example
(classic v2.00)
Sent:
Query reply:
“READYCK=1”
“1” (if PPC2+ condition has stayed ready)
“0” (if PPC2+ condition has NOT stayed ready)
Errors ERR# 6: Argument is not a ‘0’ or a ‘1’.
See Also Section 3.1.2.4, “SR?” program message
REMOTE
Purpose Lock out the front panel controls.
Command “REMOTE”
Classic “REMOTE”
Remarks The PPC2+ goes into remote mode whenever communications take place. The user
can return to local operation by pressing the [ESC] key. The REMOTE program
message locks out the front panel completely. The only way to unlock the front
panel is by using the LOCAL program message, the IEEE-488 ‘GTL’ command, or by
cycling the PPC2+ power.
Example
(enhanced)
Cmd sent:
Reply:
“REMOTE”
“REMOTE” (no reply if IEEE-488)
Example
(classic)
Sent:
Reply:
“REMOTE”
“REMOTE”
See Also “LOCAL”