devention DEVO-12 Скачать руководство пользователя страница 83

Страница: 83 / 239

User Manual for DEVO-12

Page 83 of 238

pitch curve will be smoothly changed if clicking On. Otherwise click Off.

2) Curve

setting

It includes four sub-items: Point, Status, Output, and Hovering.

2.1) Point setting

Touch the navigation mark of Point and expand into nine points for selection. Touch

the point that you want to amend.

2.2) Status setting

Touch the navigation mark of Status and expand into two options: Inhibit and Active.

Click Inhibit for keeping the current amount of the selected point (the factory default

setting is Inhibit); Click Active for changing its current amount with a dropdown of

Output popped up.

2.3) Output setting

Touch the left or right navigation mark of Output to decrease or increase, respectively,

the output amount with a range from -100% and +100%.

2.4) Hovering setting

After all the said steps finished, the item Hovering should be set as On as well as all

the points in the pitch curve should be activated if PIT Trim will be necessary to be

used in flight. The points of 1-3, M, 4-6 will being paralleled to move the pitches up or

down while adjusting PIT Trim.

3) Flight mode setting

Flight Mode includes six sub-items: Normal Mode, Stunt 1, Stunt 2, Stunt 3, Stunt 4,

and Throttle Hold (the flight mode should be previously set at Flight Mode Extra

Содержание DEVO-12
















































































































































































































































Результаты поиска

Содержание DEVO-12

Отзывы:

Похожие инструкции для DEVO-12

Бренды по названию

Популярные бренды

devention DEVO-12, Руководство пользователя

Результаты поиска

Содержание DEVO-12

Отзывы:

Похожие инструкции для DEVO-12

Бренды по названию

Популярные бренды