devention DEVO-12 Скачать руководство пользователя страница 129

Страница: 129 / 239

User Manual for DEVO-12

Page 129 of 238

3.3) Trim setting

Click the navigation mark of Trim and expand a submenu with Inhibit, Left Trim, Right

Trim, AUX2 Lever, AUX3 Lever, AUX4 Lever, AUX5 Lever, AUX6 Knob, and AUX7

Knob. Choose the item that you want to select as trim lever.

3.4) the settings for Aileron, Rudder, and Flap in the item Channel are same as above.

4) Twin Engine

This function can be set as twin engine output to meet the requirement for the models,

which are powered by twin engines.

4.1) Mate setting

Click the navigation mark of Mate and expand a dropdown menu with Inhibit and the

inhibited channels previously set in “2.11 Device Output”. Choose the desired channel

in black. These channels in gray are not available.

4.2) Trim setting

Click the navigation mark of Trim and expand into Inhibit, Left Trim, Right Trim, AUX2

Lever, AUX3 Lever, AUX4 Lever, AUX5 Lever, AUX6 Knob, and AUX7 Knob.

Содержание DEVO-12
















































































































































































































































Результаты поиска

Содержание DEVO-12

Отзывы:

Похожие инструкции для DEVO-12

Бренды по названию

Популярные бренды

devention DEVO-12, Руководство пользователя

Результаты поиска

Содержание DEVO-12

Отзывы:

Похожие инструкции для DEVO-12

Бренды по названию

Популярные бренды