User Manual for DEVO-12
Page 54 of 238
Setting method:
1) setting Throttle stick as warning
Click the navigation mark of Throttle Stick in the interface of Warning. It expands into
Inhibit and Active. If Inhibit clicked, the dropdown menu is retracted. If Active clicked, it
will expand into two sub items: On and Position.
The throttle stick can be set at high or low position when startup is warning, via
clicking the navigation mark of On. The warning level can be set by changing the
percentage in Position, whose setting value is ranged from 0.0 to 100.0%.
Take the right-hand throttle as an example. Position is 0.0% when the throttle stick is
at the lowest position; Position is 100.0% when the throttle stick is at the highest
position. In factory, Throttle Stick is set as Active, Position in High direction at 10.0%.
2) setting other items
Other flight modes and switches warning is shown in the lower-middle part of the
interface. Click the corresponding items you want to use. The factory default setting
includes Stunt 1, Stunt 2, Stunt 3, Stunt 4, and Throttle Hold.
Click
to exit.
2.10 Device select
This setting can help you configure various functional switches, or adjust levers. It
includes Flight Mode Main Switch, Flight Mode Extra Switch, Stunt Trim Select,
Throttle Hold Switch, Hovering Pitch, and Hovering Throttle.
Setting method:
Touch the icon
to enter Model Menu, and then click the icon
to
enter Device Select.
Содержание DEVO-12
Страница 239: ...G G G G G G G G G G G...
