devention DEVO-12 Скачать руководство пользователя страница 155

Страница: 155 / 239

User Manual for DEVO-12

Page 155 of 238

Aileron/ Elevator Mix.

1) Elevator

setting

1.1)

Pos 0 setting:

Touch the left or right navigation mark of Left at Pos 0 to change the value, and the

leftward mix value of rudder to elevator will be changed.

Touch the left or right navigation mark of Right at Pos 0 to change the value, and the l

rightward mix value of rudder to elevator will be changed.

The mix direction will be revised by changing the symbol of plus or minus before the

value. The adjustable range is ±125%.

1.2)

Pos 1 setting

Setting is same as above.

2) Aileron

setting

Setting is same as above.

3) Throttle stick setting

The switch between Pos 0 and Pos 1 can be realized by setting the position of throttle

stick. Touch the left or right navigation mark of Throttle Stick to the position amount of

throttle stick. The default setting is Inhibit. The adjustable range is 0.0-100.0%.

4) Switch

setting

Touch the navigation mark of Switch and expand a dropdown menu including some

selectable items. Click the desired item and “0” before the item will be changed into

“1”. If two or more items are selected, And should be selected. Then touch the

navigation mark to return back.

Содержание DEVO-12
















































































































































































































































Результаты поиска

Содержание DEVO-12

Отзывы:

Похожие инструкции для DEVO-12

Бренды по названию

Популярные бренды

devention DEVO-12, Руководство пользователя

Результаты поиска

Содержание DEVO-12

Отзывы:

Похожие инструкции для DEVO-12

Бренды по названию

Популярные бренды