User Manual for DEVO-12
Page 214 of 238
1) Flap Lever Offset setting
This function can be used to set the neutral point of Flaperon servos.
Touch the left or right navigation mark of Flap Lever Offset to decrease or increase,
respectively, amount. The adjustable range is ±100%. It is possible to change the
offset direction by changing the sign before the amount.
2) Flight Mode setting
Flight Mode at Device Select should be previously chosen before using this function
(refer to “2.10 Device Select”).
Touch the navigation mark of Flight Mode to select the desired item in the following
popup list.
2.1) Flap to Flaperon
Touch the navigation mark of Up or Down to change the Flaperon mix value when
moving the Flaperon stick. The bigger the value is, the bigger mix is. The adjustable
mix is ranged from -125% to + 125%. It is possible to alter the Flaperon mix direction
by changing the sign before the value.
2.2) Flap to Elevator
Touch the navigation mark of UP or Down to change the elevator mix value when
moving the Flaperon stick. The bigger the value is, the bigger the mix is. The
adjustable mix is ranged from -125% to + 125%. It is possible to alter the elevator mix
direction by changing the sign before the value.
Touch the icon
to exit.
3.7 Camber system
This function can change the flap angle and aileron angle which goes through central
line of the main wing, and then change the features of main wing. It can be
independently set in each flight mode.
Содержание DEVO-12
Страница 239: ...G G G G G G G G G G G...
