devention DEVO-12 Скачать руководство пользователя страница 35

Страница: 35 / 239

User Manual for DEVO-12

Page 35 of 238

1.3 Display

Touch the shortcut icon

to enter System Menu and then touch the icon

to enter “Display”.

Five items are available to be set. Below are the setting methods for them:

1) LCD brightness: it is possible to increase or decrease the LCD brightness by

touching the navigation marks. The power consumption will be increased if the

LCD is too bright and the battery cruise duration will also be shortened.

2) LCD contrast: the contrast is adjustable by touching the navigation marks. The

power consumption will be increased if the contrast is too high and the battery

cruise duration will be shortened.

3) Backlight lightness: the backlight lightness is adjustable by touching the

navigation marks. The power consumption will be increased if the backlight

lightness is too bright and the battery cruise duration will be shortened.

4) Backlight time out: it is possible to set the duration which LCD stays at highlight in

the form of “Always on” or any period from 5 to 60 seconds with an interval of 5

seconds.

5) Power save time: it can adjust the duration which turns off the backlight light in

order to prolong the battery cruise time. The setting status contents Always on and

30 grades with an interval of 1 minute.

Touch

to exit.

Содержание DEVO-12
















































































































































































































































Результаты поиска

Содержание DEVO-12

Отзывы:

Похожие инструкции для DEVO-12

Бренды по названию

Популярные бренды

devention DEVO-12, Руководство пользователя

Результаты поиска

Содержание DEVO-12

Отзывы:

Похожие инструкции для DEVO-12

Бренды по названию

Популярные бренды