devention DEVO-12 Скачать руководство пользователя страница 180

Страница: 180 / 239

User Manual for DEVO-12

Page 180 of 238

stick. The default setting is Normal.

6) Stick & lever calibration: if variance happened in sticks or levers, it would be

calibrated via this option.

Method for calibration:

Click the display item of Start to enter the status of calibration, and Start will be turned

into Stop.

2.1) Stick calibration: Clockwise or counter clockwise mechanically move the right

stick and left stick from their minimum levels to their maximum levels several times,

and then return the sticks to the neutral positions, respectively.

2.2) Lever calibration: mechanically move the levers of AUX2, AUX3, AUX4, and

AUX5, respectively, from the minimum level to the maximum level several times, and

then return to the neutral positions, respectively.

2.3) Click the display item of Stop. If the calibration is finished, “Calibration success!”

will be shown on the lower of the screen. If the calibration is failed, “Calibration error!

Please try again!” will be shown instead. It need to be calibrated again.

Содержание DEVO-12
















































































































































































































































Результаты поиска

Содержание DEVO-12

Отзывы:

Похожие инструкции для DEVO-12

Бренды по названию

Популярные бренды

devention DEVO-12, Руководство пользователя

Результаты поиска

Содержание DEVO-12

Отзывы:

Похожие инструкции для DEVO-12

Бренды по названию

Популярные бренды