devention DEVO-12 Скачать руководство пользователя страница 216

Страница: 216 / 239

User Manual for DEVO-12

Page 216 of 238

The flap dual channels should be previously set in Wing Type (refer to “2.12 Wing

Type”).

Touch the navigation mark of L- or R-Flap to change the position of L- or R- Flap with

a range of ± 100%. It is possible to alter the direction of L- or R-aileron via changing

the character of “R” or “L” before the amount.

4) L- or R-Tip Aileron setting

The tip aileron should be previously set at Wing Type (refer to “2.12 Wing Type”).

Touch the navigation mark of L- or R-Aileron to change the position of L- or R-aileron

with a range of ± 100%. It is possible to alter the direction of L- or R-aileron via

changing the character of “R” or “L” before the amount.

Click the icon

to exit.

3.8 Differential

1) Flight mode setting

The flight mode should be previously set in Device Select (refer to “2.10 Device

Select”).

Touch the icon

to enter Function Menu, and then click

the icon to

enter the interface of Differential.

1.1) Aileron

setting

It is possible to decrease the vibration to the head from reverse direction in operating

aileron.

Touch the left or right navigation mark of Aileron to decrease or increase, respectively,

the value with a range of ± 100%. The bigger the value is, the bigger the differential is.

1.2) Rudder

setting

Содержание DEVO-12
















































































































































































































































Результаты поиска

Содержание DEVO-12

Отзывы:

Похожие инструкции для DEVO-12

Бренды по названию

Популярные бренды

devention DEVO-12, Руководство пользователя

Результаты поиска

Содержание DEVO-12

Отзывы:

Похожие инструкции для DEVO-12

Бренды по названию

Популярные бренды