devention DEVO-12 Скачать руководство пользователя страница 50

Страница: 50 / 239

User Manual for DEVO-12

Page 50 of 238

Select.

Choose the model type and then touch the icon

to exit.

2.7 Trim system

Trim System is able to finely tune the following six items, respectively: Elevator,

Aileron, Rudder, Throttle, Left Trim, and Right Trim. The trim range is divided into 20

grades (factory default is set at 4). It is convenient to subtly modify the pitch by

adjusting the trim range.

Touch the icon

to enter Model Menu and then click

to enter

Trim System.

Touch the corresponding navigation mark to change the trim value. The bigger the

trim value is, the bigger the trim range will be.

For elevator, aileron, and rudder, there are two more options: Normal and Limited.

Содержание DEVO-12
















































































































































































































































Результаты поиска

Содержание DEVO-12

Отзывы:

Похожие инструкции для DEVO-12

Бренды по названию

Популярные бренды

devention DEVO-12, Руководство пользователя

Результаты поиска

Содержание DEVO-12

Отзывы:

Похожие инструкции для DEVO-12

Бренды по названию

Популярные бренды