Detnov CCD-103, Руководство пользователя

Страница: 74 / 170

30
GB
Actions in case of out of service:
The only action you can take in this case is to:
• Press the buzzer silence key to stop the acoustic warning.
• Restore the mains power supply (220V).
• Replace the batteries with fully charged ones.
6.4.7- System fault mode
System fault mode is caused when a critical situation occurs in the panel and it cannot
function correctly. The system fault warning is the following:
• General fault warning activated continuously.
• Out of service warning activated continuously.
• Acoustic warning activated continuously.
• Fault output activated.
6.5- Extinction Block Modes
The extintion block has three operating modes; wich can be accessed with the mode
selector switch: Automatic – Manual Mode, Manual Mode and Cancel Mode.
6.5.1- Operating mode Automatic – Manual
The extinction process initiates automatically in case of alarm in its corresponding
zones, according to the selected settings and delay.
The extinction process starts also manually, responding to the different funtions of
each manual push button.
6.5.2- Operating Mode Only Manual
In case of alarm, the extinction process only shows the different states, but it doesn’t
activate the extinction.
In this mode, the extinction olny starts manually, according to the different funtions of
the pushbuttons.
Access to the Manual Mode:
• Selectable with the 3 positions switch.
• Stated with its corresponding led.
• Activates the digital output “Only Manual Mode”.
6.5.3- Disabled operating mode.