A
222 W. Memorial Road, Oklahoma City, OK 73126-0508
Phone: 1-800-624-7697
½
Fax: 405-755-8425
www.magpowr.com
½
E-mail: [email protected]
INSTRUCTION MANUAL
Perma-Tork
®
Units
HB6-1, HC6-58, HC6-34
All of the information herein is the exclusive proprietary property of Maxcess International, and is disclosed with the
understanding that it will be retained in confidence and will neither be duplicated nor copied in whole or in part nor
be used for any purpose other than for which disclosed.
Copyright 2004, all rights reserved.
Periodically there will be updates to this manual. The latest version is available at www.magpowr.com or by calling
1-800-MAGPOWR (624-7697).
Handling
Handle and install with care. This is a precision-assembled unit with close internal clearances. The
magnetic materials used are brittle by nature. Avoid subjecting to shock loads.
DO NOT DROP
.
Installation
Perma-Tork hollow shaft units are easily adaptable for use as either a clutch or brake. As a clutch, either
the hollow shaft or the housing can be the input. The unit mounts on a shaft, and a convenient bolt circle
and pilot diameter provide ease of attachment to a gear, pulley, etc. A stub shaft adapter can be used
where a shaft is required.
Brake Units
HB6-1
1.
Brake units must be securely mounted to a mounting bracket or plate, using three ¼-20 screws and
lockwashers (see “A” in Figure 1 and Figure 4).
Locking bolts and spanner wrench holes must be readily accessible for adjustment.
(See Figure 4).
2.
Mount sheave, pulley, or sprocket to output shaft as shown in Figure 1.
Figure 1
850A116-1
10/04 Rev. B