Det-Tronics Eagle Quantum 95-8470-05, Инструкция по эксплуатации

Страница: 4 / 128

IMPORTANT
Be sure to read and understand the entire
instruction manual before installing or operating the
Eagle Quantum System. Only qualified personnel
should install, maintain or operate the Eagle
Quantum System.
WARNING
The hazardous area must be de-classified prior to
removing a junction box cover or opening a
detector assembly with power applied.
CAUTION
1. The wiring procedures in this manual are
intended to ensure proper functioning of the
devices under normal conditions. However,
because of the many variations in wiring codes
and regulations, total compliance to these
ordinances cannot be guaranteed. Be certain
that all wiring complies with the NEC as well as
all local ordinances. If in doubt, consult a
qualified official before wiring the system.
2. Some Eagle Quantum devices contain
semiconductor devices that are susceptible to
damage by electrostatic discharge. An
electrostatic charge can build up on the skin and
discharge when an object is touched. Always
observe the normal precautions for handling
electrostatic sensitive devices, i.e. use of a wrist
strap (if available) and proper grounding.
3. To prevent unwanted actuation, alarms and
extinguishing devices must be secured prior to
performing system tests.
Section I
System Overview
SYSTEM DESCRIPTION
The Eagle Quantum System serves multiple roles in the
monitoring and protection of hazardous areas. It is a
“fire detection and extinguishing agent release system”
combined with a “hazardous gas monitoring system,”
integrated on a fault tolerant digital communication
network. The Eagle Quantum system utilizes an
advanced distributed architecture that is equally adept
at monitoring analog process signals like combustible
or toxic gas concentrations, and discrete “contact
closure” type devices such as manual fire alarm “call
boxes” and heat detectors, as well as Det-Tronics
optical flame detection. This sensor information is then
transmitted to the control unit to execute the fire
suppression logic, to control agent release, signaling,
and annunciation outputs, and to communicate with
external operator interface systems for configuration
and monitoring.
INSTRUCTIONS
Eagle Quantum
Fire and Gas
Detection/Releasing System
©
Detector Electronics Corporation 2001 10/01 95-8470-05
DET
-
TRONICS
®
*
oi
is Detector Electronics' Trademark for its patented Optical
Integrity Systems, U.S. Patent 3,952,196, United Kingdom Patent
1,534,969, Canada Patent 1,059,598.