Dentsply Sirona DAC Universal Touch, Руководство по эксплуатации

Страница: 107 / 124

Dentsply Sirona
Operating Instructions DAC Universal 5 Cleaning, maintenance and validation
5.5 Adding/replacing the lubrication concentrate
6681006 D3708
D3708.201.01.01.02 04.2019
107
2.
Press the black top of the oil bottle to release the transport lock.
3. Insert the oil bottle thread down into the thread of the oil dispenser
(next to the water tank).
4. Turn the oil bottle carefully clockwise until you meet resistance.
5. Close the cover on the DAC Universal.
Ä
The oil bottle is now inserted in the DAC Universal.
IMPORTANT
If no oil bottle is used, the device will show an error message when
using the Blue lid.
Replacing the oil bottle
IMPORTANT
The oil bottle must be replaced when the "Low oil" message appears
on the display.
ü The lid on the DAC Universal is open.
1. Unscrew the empty oil bottle counterclockwise and remove it from
the oil dispenser.
IMPORTANT
If the oil bottle is not completely empty, small quantities of oil may
leak out of the bottle. Wipe the oil away with an absorbent cloth.
2. Remove the lid from the new NitramOil #2 bottle.
3. Press the black top of the oil bottle to release the transport lock.
4.
Insert the new oil bottle thread down into the thread of the oil
dispenser (next to the water tank).
5.
Turn the oil bottle carefully clockwise until you meet resistance.
6. Close the cover on the DAC Universal.
Ä
The oil bottle has been replaced.
Tip: You can also remove a partially used oil bottle that is not yet empty
from the DAC Universal and insert it again at a later time.