Dentsply Sirona DAC Universal Touch Скачать руководство пользователя страница 101 | Manualshive

Страница: 101 / 124

Dentsply Sirona DAC Universal Touch Скачать руководство пользователя страница 101

Dentsply Sirona
Operating Instructions DAC Universal

5 Cleaning, maintenance and validation

5.1 Check & Clean process

6681006 D3708
D3708.201.01.01.02 04.2019

101

5.

Repeat for all available adapters.

WARNING

Risk of contamination!

If the O-rings are not placed on the correct notches on the adapter,
the instruments and the O-rings can be damaged. Correct cleaning
and sterilization / disinfection is not ensured.

WARNING

Risk of contamination!

If the O-rings are damaged or are missing, the reprocessing cycle
cannot be guaranteed. Cross-contamination may occur.

Some adapters have internal O-rings that must be replaced by your
service technician during servicing (see separate adapter operating
instructions).

For further information about the adapters and the corresponding O-
rings, please see the separate operating instructions for adapters.

5.1.18

Clean the housing of the unit / the lid and the chamber

Frequency: Weekly or every 50 cycles (whichever comes first).

ü

The DAC Universal is switched on and is in the Check & Clean
process menu.

ü

All available Blue and Green lids are ready.

1.

Go to the next Check & Clean option by pressing the "

Next Check &

Clean step" function key.

04:00 PM

2.

Clean the device house, all the available lids and the chamber of
the DAC Universal with a soft, lint-free cloth and a solution made of
70% isopropyl.

04:00 PM

NOTE

The surface must not be cleaned with agents containing chlorine.

NOTE

Approved care, cleaning, and disinfecting agents

Use only care, cleaning, and disinfecting agents approved by
Dentsply Sirona!

A continuously updated list of approved agents can be downloaded
from the Internet on the online portal for technical documents. The
portal can also be accessed directly via the following address:
www.dentsplysirona.com/manuals

«
...
99
100
101
102
103
...
»

Содержание DAC Universal Touch





























































































































Отзывы:

Нет отзывов