Delta IED-S Series, Руководство пользователя

Страница: 390 / 417

Chapter 14 Fault Codes | IED-S
14-9
Code# KPC-CC01 Display Fault Name Description
F144
Mismatched current
floor
Fault occurs when the floor for the host controller and
that for the drive is not identical as elevator stops
Action and Reset
Action Acts immediately
Related Parameters N/A
Reset Method
Returns to the top floor automatically, or resets automatically after adjusting floor
when returning to the top floor, or switch to the manual mode
Code# KPC-CC01 Display Fault Name Description
F145
The number of times
for drive error occurred
has reached five
Fault occurs when the number of times that drive error
occur within one hour has reached five
Action and Reset
Action Stops urgently
Related Parameters N/A
Reset Method
Press the RESET key on the digital keypad, press the external reset device, or
power-on again (choose either)
Code# KPC-CC01 Display Fault Name Description
F146
Drive communication
time-out
Fault occurs when communication is not successfully
connected with the drive within Pr.02-13 setting time
Action and Reset
Action Stops urgently
Related Parameters Pr.02-13 (CAN0 Communication Time-out)
Reset Method Resets automatically once communication is normal
Code# KPC-CC01 Display Fault Name Description
F147
Communication
between IED-S and
cartop board
Fault occurs when communication between IED-S and
cartop board is not successfully connected within
Pr.02-19 setting time. Error is not detected when in
control panel manual mode.
Action and Reset
Action Stops urgently
Related Parameters Pr.02-19 (CAN2 Communication Time-out)
Reset Method Resets automatically once the fault is cleared
Code# KPC-CC01 Display Fault Name Description
F148
BY1NC ON detection
error
Fault occurs when BY1NC (Brake-1 contactor
detection) signal is not OFF after brake contactor
activates (ON)
Action and Reset
Action Stops urgently
Related Parameters MI=27 BY1NC (N.C. contact of Brake-1 contactor)