Delta IED-S Series, Руководство пользователя

Страница: 310 / 417

Chapter 12 Descriptions of Parameter Settings | IED-S
12-06-3
Setting
Value
MI Function Description
FL1) detect whether FL1 contactor (Relay) sticks or not.
6
FL2NC (Contact B of the relay for
FL2) Contact B (N.C.) of FL2 contactor (Relay). Used to
detect whether FL2 contactor (Relay) sticks or not..
7
INSCP (Control panel inspection
switch)
When LED indicator is ON, the control panel
inspection mode is enabled. When LED indicator is
OFF, the automatic mode is enabled.
8
ICPUP (Control panel inspection
upward)
When in the control panel inspection mode, the
elevator runs inspection upward if LED indicator is
ON and runs inspection downward if LED indicator
is OFF.
9
ICPDN (Control panel inspection
downward)
10 MATPT (Inspection from pit)
When LED indicator is ON, the pit inspection
operation mode is enabled. When LED indicator is
OFF, the automatic mode is enabled.
11 EIS (Emergency operation)
When LED indicator is ON, emergency operation
mode is enabled. The system cancels automatic
operation and automatic door open/close function.
You can only press the upward/downward button of
the emergency operation to run the elevator.
12
UDB (Emergency upward operation
button) Run the emergency upward operation when LED
indicator is ON.
13
DDB (Emergency downward
operation button) Run the emergency downward operation when LED
indicator is ON.
14 RESET (External reset device) Runs the external reset when LED indicator is ON.
15 SFH (Safety hatch high voltage)
The safety hatch safeguards the running of the
elevator. To ensure safety, the elevator is prohibited
to run when the safety hatch is OFF. When LED
indicator is ON, the safety hatch is normal.
16 SFL (Safety hatch low voltage)
17
SFNC (N.C. contact of safety hatch
contactor)
The N.C. (B) contact of safety (SF) hatch contactor
(relay). Used to detect whether the safety hatch
contactor (relay) sticks or not.
18 GSH (Gate safety hatch high voltage) Rear and front gate have closed when LED indicator
is ON.
19 GSL (Gate safety hatch low voltage)
20
GSNC (N.C. contact of gate safety
(GS) hatch contactor)
The N.C. (B) contact of gate safety (GS) hatch
contactor (relay). Used to detect whether the gate
safety hatch contactor (relay) sticks or not.
21
DSH (Layer door safety hatch high
voltage)
All layer doors have closed when LED indicator is
ON.
22
DSL (Layer door safety hatch low
voltage)
23
DSNC (N.C. contact of layer door
safety (DS) hatch contactor)
The N.C. (B) contact of layer door safety (DS) hatch
contactor (relay). Used to detect whether the layer
door safety hatch contactor (relay) sticks or not.
25 TCIN (Traveling cable insertion)
1. When LED indicator is ON, the traveling cable is
inserted and communication between IED-S and
cartop is normal. If communication between
IED-S and cartop is bad even traveling cable is
inserted, the elevator cannot run, and inspection
operation is also unavailable.
2. If cartop or car inspection uses serial
communication, and traveling cable is not
inserted, then the elevator can run inspection
operation in machine room, but cannot run
inspection operation in cartop or car.
26
SWNC (N.C. contact of operation
contactor (SW))
N.C. contact of operation contactor (SW). Used to
detect whether the SW contactor (relay) sticks or
not.