Delta IED-S Series, Руководство пользователя

Страница: 146 / 417

Chapter 8 Specifications | IED-S
8-3
8-3 General Specifications
Control Ch
aracteri
stics
Control Method FOC+PG, FOC+PM
Starting Torque 150% at 0 Hz
Speed Control Range 1: 1000
Speed Control Accuracy

0.02%
Speed Response Ability 30 Hz
Max. Output Frequency 0.00–400.00 Hz
Frequency Setting Resolution Digital command: 0.01 Hz; 0.01 m/s
Torque Limit 200% of the torque current is the maximum
Acceleration / Deceleration 0.10–1.50 m/s 2
Brake Torque
About 125% while ED is 30% (use optional brake resistor)
NOTE: ED is “Executive Duty”
Protectio
n Ch
ara
cteri
stics
Motor Protection Electronic thermal relay protection
Over-current Protection 250% of the drive’s rated current
Ground Leakage Current
Protection
More than 50% of the drive’s rated current
Overload Capacity
Endures 60 seconds for 150% of the rated output current;
Endures 10 seconds for 180% of the rated output current
Voltage Protection
Over-voltage level:
[230V Model] V
DC
> 400V
[460V Model] V
DC
> 800V
Low-voltage level:
[230V Model] V
DC
< 200V
[460V Model] V
DC
< 400V
Over-voltage Protection for
Input Power
Varistor (MOV)
Overheating Protection Built-in temperature sensor
Environme
nt
Protection Level IP00
Operating Temperature -10–40°C, up to 50°C with derating for the operating temperature
Storage Temperature -20–60°C
Humidity Below 90% RH (non-frosting)
Vibration 1.0 G when smaller than 20 Hz; 0.6 G when between 20–60 Hz
Cooling System Fan cooling
Installation Altitude Below 1,000 m (free from dust, corrosive gases and liquids)
Certifications