Delta IED-S Series, Руководство пользователя

Страница: 313 / 417

Chapter 12 Descriptions of Parameter Settings | IED-S
12-06-6
Setting
Value
MI Function Description
106 SE1 (Front door safety edge) The safety edge is touched when LED indicator is
ON. At this time, the door is unable to act when door
full close signal and doorlock signal activate.
107 SE2 (Rear door safety edge)
108 100KG (Light-duty switch) Car load exceeds 100 kg when LED indicator is ON.
109 LWX (Full-load switch)
Elevator load is 85% larger than the rated load when
LED indicator is ON. The elevator does not respond
to hall call once this switch activates.
110 LWO (Overload switch)
When LED indicator is ON, elevator load exceeds,
door remains open, buzzer bees, car displays
overload, and the elevator does not execute
re-leveling.
111 150% (Forklift overload switch)
Elevator load is 150% larger than the rated load.
This is a forklift application function. When this
function is enabled, the elevator re-levels once
overload (LWO) activates. When 150% switch
activates, elevator door remains open, 150% buzzer
alarms, and the elevator does not execute
re-leveling. The registered call from car or hall is
cancelled.
112 TCI (Cartop inspection switch)
Enters cartop inspection mode when LED indicator
is ON and enters automatic mode when LED
indicator is OFF.
113 TCIU (Cartop inspection upward)
Uses inspection upward operation when LED
indicator is ON.
114 TCID (Cartop inspection downward)
Uses inspection downward operation when LED
indicator is ON.
115 HFD (With front door)
Current floor at which the elevator is has a front door
when LED indicator is ON. This is used for elevator
with front and rear doors.
116 HBD (With rear door)
Current floor at which the elevator is has a rear door
when LED indicator is ON. This is used for elevator
with front and rear doors.
117
DTS1 (Front door motor temperature
switch)
Motor temperature is normal when LED indicator is
ON.
118
DTS2 (Rear door motor temperature
switch)
119 TOEX1 (Front door over-torque) Over-torque while closing door when LED indicator
is ON.
120 TOEX2 (Rear door over-torque)
121
DOBOC1 (Cartop inspection front
door open button)
Executes cartop inspection door open test when
LED indicator is ON.
122
DOBOC2 (Cartop inspection rear door
open button)
123
DCBOC1(Cartop inspection front door
close button)
Executes cartop inspection door closing test when
LED indicator is ON.
124
DCBOC2 (Cartop inspection rear door
close button)
125 BALWG (Balanced switch)
Car weight is heavier than counterweight when LED
indicator is ON. Executes downward safety landing
when power is supplied by EPS.
Car weight is lighter than counterweight when LED
indicator is OFF. Executes upward safety landing
when power is supplied by EPS.
150 DCB1 (Front door close button)
Front door close button is pressed when LED
indicator is ON.
151 DOB1 (Front door open button)
Front door open button is pressed when LED
indicator is ON.
152
DOBH1 (Front door open extended
button) Front door open extended button is pressed when
LED indicator is ON.
153 INSIC (Car inspection switch) Under car inspection mode when LED indicator is