Delta IED-S Series, Руководство пользователя

Страница: 316 / 417

Chapter 12 Descriptions of Parameter Settings | IED-S
12-06-9
Setting
Value
MO Function Description
12 ERR (Error output) Outputs when error occurs in elevator
13
FIRLD (Main landing at fire
emergency) Outputs when elevator arrives main landing at fire
emergency under fire mode.
14 RG (Rope gripper)
Makes standby break (rope gripper) NOT brake when
LED indicator is ON.
15 SY (Door unlock contactor)
Outputs only when re-leveling after door open and door
pre-opens at stop. Otherwise, SY is OFF.
16
QKOK (Earthquake control
finished) Outputs after earthquake control operation procedure is
finished.
17 SDBZ (Supervisory panel alarm)
When “severe earthquake (ERH)” signal activates,
supervisory panel alarm bees until “severe earthquake
safety landing (ERGO)” switch is triggered.
18 ERHL (Severe earthquake light)
ERHL light is ON when “severe earthquake (ERH)”
signal activates; ERHL light is OFF when “severe
earthquake (ERH)” signal resets.
100 OP1 (Front door opens) Outputs front door open signal
101 OP2 (Rear door opens) Outputs rear door open signal
102 CL1 (Front door closes) Outputs front door close signal
103 CL2 (Rear door closes) Outputs rear door close signal
104 BZ (Buzzer)
Outputs when overload occurs or doorlock bypass is
activated.
105
BPSL (Doorlock bypass lighting
alarm) Outputs when doorlock bypass is activated. The alarm is
ON for 0.4 seconds and OFF for 0.4 seconds.
106 UDCL (Car bottom light)
Steady ON when in inspection. The light is ON for 0.4
seconds and OFF for 0.4 seconds when doorlock bypass
is activated.
107 F (Car fan) Outputs fan signal. Fan stops when LED indicator is ON.
108 CLI (Car lighting)
Outputs lighting signal. Lighting is off when LED indicator
is ON.
109 LPT (Floor arrival clock) Outputs floor arrival clock signal for 0.5 second
110 LPTU (Upward floor arrival clock)
Outputs floor arrival clock signal when arriving at
designated floor upward for 0.5 second.
111
LPTD (Downward floor arrival
clock) Outputs floor arrival clock signal when arriving at
designated floor downward for 0.5 second.
112
FCL1 (Front door forced close at
low speed) Executes front door forced close at low speed when LED
indicator is ON.
113
FCL2 (Rear door forced close at
low speed) Executes rear door forced close at low speed when LED
indicator is ON.
114
S2XX0 (Voice announces the
floor arrives)
Outputs when floor arrives
115
S2XX1 (Voice announces the
floor arrives)
Outputs when floor arrives
116
S2XX2 (Voice announces the
floor arrives)
Outputs when floor arrives
117
S2XX3 (Voice announces the
floor arrives)
Outputs when floor arrives
118
S2XX4 (Voice announces the
floor arrives)
Outputs when floor arrives
119
S2XX5 (Voice announces the
floor arrives)
Outputs when floor arrives
120 SPK (Voice announcement)
Provides audible announcement of an elevator’s arrival
on floor
121 SOP (Voice door open) Voice announces the elevator is opening the door
122 SCL (Voice door close) Voice announces the elevator is closing the door
123 SUP (Voice upward) Voice announces the elevator is running upward
124 SDN (Voice downward) Voice announces the elevator is running downward
125 SOLD (Voice overload) Voice announces the elevator is overloading
126 SSEV (Voice EMT medical use ) Voice announces the elevator is in emergency medical