Delta IED-S Series, Руководство пользователя

Страница: 389 / 417

Chapter 14 Fault Codes | IED-S
14-8
Related Parameters N/A
Reset Method Resets automatically
Code# KPC-CC01 Display Fault Name Description
F140
Motor temperature
error
Fault occurs when there is an error in motor
temperature
Action and Reset
Action Acts immediately
Related Parameters MI=50 MTS (Motor temperature overheat)
Reset Method Resets automatically once the signal is normal
Code# KPC-CC01 Display Fault Name Description
F141
Exceeds the constant
running time
Fault occurs when the time that the elevator runs
continuously with any speed in any status exceeds
Pr.03-24 setting value. If the fault occurs in manual
mode, release the upward and downward operation
buttons to make the elevator continue to run. Otherwise,
the elevator resets automatically after it stops urgently
for five seconds. But if the number of fault occurred is
larger than Pr.03-23 within one hour, it will not reset
automatically.
Action and Reset
Action Stops urgently
Related Parameters Pr.03-23 (Number of Fault Reset), Pr.03-24 (Constant Running Protection Time)
Reset Method
Switch to the manual mode, press the RESET key on the digital keypad, press
the external reset device, or power-on again (choose either)
Code# KPC-CC01 Display Fault Name Description
F142 Governor error Fault occurs when governor activates
Action and Reset
Action Stops urgently
Related Parameters MI=55 GOV (Governor)
Reset Method Resets automatically once the signal is normal
Code# KPC-CC01 Display Fault Name Description
F143
Exceeds specified floor
running time
Fault occurs when the elevator runs at high speed, and
does not pass through or arrives at the specified floor
within Pr.03-25 setting time
Action and Reset
Action Stops urgently
Related Parameters Pr.03-25 (Specified Floor Protection Time)
Reset Method
Switch to the manual mode, press the RESET key on the digital keypad, press
the external reset device, or power-on again (choose either)