Delta IED-S Series, Руководство пользователя

Страница: 246 / 417

Chapter 11 Summary of Parameter Settings | IED-S
11-45
13 Drive Parameters
Pr. Parameter Name Setting Range Default
13-00 Drive Software Version Read only #.##
13-01 Control Mode
0–8
3: FOC vector c Encoder (FOCPG)
8: FOC Permanent Motor control (FOCPM)
0
13-02 Drive Output Direction
0–1
0: The same as the setting direction
1: Opposite to the setting direction
0
13-03 Elevator Rated Frequency 0.00–400.00 Hz 60.00
13-04 Motor Rated Frequency 0.00–400.00 Hz 60.00
13-05 Motor Rated Voltage 0.0–510.0 V 440.0
13-06 Motor Rated Current 0.10–650.00 Amps 2.00
13-07 Motor Rated Power 0.10–650.00 kW 2.00
13-08 Motor Rated Speed 0–65535 rpm 0
13-09 Number of Motor Poles 0–96 0
13-10 IM No-load Current 0.00–655.35 0.00
13-11 IM/PM Rs 0.000–65.535
Ω
0.000
13-12 IM Rr 0.000–65.535
Ω
0.000
13-13 IM Lm 0.0–6553.5 mH 0.0
13-14 IM Lx/PM Lq 0.0–6553.5 mH 0.0
13-15
PM Back Electromotive
Force
0.0–6553.5 Vrms 0.0
13-16
PM Magnetic Pole Offset
Angle
0.0–360.0° 360.0
13-17 System Control
0000h–FFFFh
Bit 0=0: No function
Bit 0=1: ARS auto-tuning; PDFF enabled; speed
bandwidth control enabled
Bit 7=0: No function
Bit 7=1: Zero speed position control is enabled
Bit 9=0: Dynamic PG origin auto-tuning with load
(supported by PGHSD-x)
Bit 9=1: Static PG origin auto-tuning with load by
enabling PGHSD-x
0281h
13-18 Current Floor of the Drive 1–64 1
13-19 Pulse Adjustment Condition 0–100 100
13-20
Maximum Elevator Speed
Percentage
30–100 50
13-21 Motor Auto-tuning
0–3
0: No function
1: Only for an unloaded motor; auto-measures the
magnetic pole offset angle (PM)
2: Executes motor auto-ting (IM / PM)
3: Auto-measures the magnetic pole offset angle (PM)
0
13-22 Selection of Encoder
0–6
0: Disabled
1: ABZ
2: ABZ + Hall (UVW type)
3: SIN/COS + Sinusoidal (ERN1185, ERN1387)
4: SIN/COS + Endat (ECN1313, ECN413)
5: SIN/COS
6: SIN/COS + Hiperface (SRS50/60)
0
13-23 Encoder Pulse 1–25000 2048