Dell OpenManage Network Manager Скачать руководство пользователя страница 53

Страница: 53 / 388

Redcell > Database Aging Policies (DAP) | Getting Started with Dell OpenManage Network Manager

The contents of the

Options

tab depend on the type of DAP you are configuring. Typically, this tab

is where you set the retention thresholds.

DAP SubPolicies

Some Options tabs include sub-policies for individual attribute retention.

Click

Add SubPolicy

or click the

Edit

button to the right of listed policies to access the editor.

Editing Tips

Archiving options that appear in the Aging Policies Editor vary, based on type of policy

selected. Inventory Change Tracking DAPs ask how long you would like to keep Config

reports, Inventory Report DAPs ask how long you would like to keep your Historical Reports

based on number of instances, days, and weeks, months or years.
Set these thresholds in the

Options

tab. All DAPs require a Name and a record threshold.

Check the

Enabled

checkbox to enable the policy.

DAPs run on a schedule. If the record threshold number is greater than or equal to the

configured threshold then the DAP runs at the scheduled time. You may also manually click

the gear icon to the right of a listed policy, and execute a DAP at any time to check that

threshold figure. In either case, if the threshold is not crossed Dell OpenManage Network

Manager creates no archives.
To verify when current DAPs are scheduled to run, open the Schedules portlet, and select the

schedule on which it runs. For most DAPs, this is the Daily (recommended) DAP. Right-click

to edit it. The Scheduled Aging Policies list should include all DAPs that have selected that

schedule.

Содержание OpenManage Network Manager





































































































































































































































































































































































































Результаты поиска

Содержание OpenManage Network Manager

Отзывы:

Похожие инструкции для OpenManage Network Manager

Бренды по названию

Популярные бренды

Dell OpenManage Network Manager, Руководство для клиента

Результаты поиска

Содержание OpenManage Network Manager

Отзывы:

Похожие инструкции для OpenManage Network Manager

Бренды по названию

Популярные бренды