Dell OpenManage Network Manager, Руководство для клиента

Страница: 314 / 388

314
ProScan Portlet | Change Management – ProScan
Editing Compliance Policy Criteria
After clicking Add Criteria , use the pick list on the upper right to select an operation to select a
criteria match type (
Contains, Doesn’t contain, [does not] match Regex
(see
Regular Expressions
on page 320), [does not] Match Regex for each line, Count number of occurrences, Perl or Java
(Groovy)). Specify the match string or regular expression (Regex) in the text editor below the pick
list.
Tip
With the
Add Criteria
button, you can configure multi-criteria policies with several lines. For example,
configure one saying a maximum of four lines containing
name-server
can appear (<5), in any order
(Match Regex for each line), and another that says the configuration must contain
no ip domain
lookup [domain]
. Notice the radio buttons
Match Any of the following
and
Match all of the
following
. Selecting
Any
means that if either of the lines matched the policy would succeed. Selecting
All
says that both lines must pass before the policy is successful.
For more complex scans, you can also enter Perl or Java (Groovy) language policies. See Perl / Java
(Groovy) Language Policies on page 322 for details about these.
NOTE:
The
does not
operators are just the negative of the match without does not.
Click the
Apply
green check button to accept your term, or the
Cancel
button to abandon your
edits.