Dell OpenManage Network Manager, Руководство для клиента

Страница: 265 / 388

Resource Monitors | Monitoring
265
8
Test Key Metrics Monitor appears in the Resource Monitors portlet.
How To:
Create a Monitor Report
You can create reports based on your monitors. The following example creates a report based on
How to: Create an SNMP Interface Monitor above.
1
Create a new Report Template by right-clicking the Report Templates portlet, selecting New
> Table Template.
2
Name the report (here: Test SNMP Interface Report).
3
Select a source in the Source tab. Here: Active Monitoring > SNMP Interfaces.
4
Notice that the Select your inventory columns panel displays the attributes available based on
your monitor selection.
5
Select Available columns and click the right arrow to move them to Selected. In this case we
select SNMP Interfaces: Monitor Target, Polled Date / Time, ifInErrors.
6
Arrange the columns and fonts as you like in the Layout tab.
7
Save the template.
8
Right-click, and select
New
in the Reports portlet.
9
Enter a Name and Title for the report.
10
Notice that since this is the first report created since you made the Test SNMP Interface
Report template, that it is the Report Template already selected.
11
Since the monitor already filters devices, we add no filter in the Report, although you could
add one to further filter the monitored devices.
12
Test SNMP Interface Report should appear in the Reports portlet.
13
Right-click and select Execute (noticing that you can also schedule such reports, even
repeatedly).