Dell Inspiron 2600, Руководство по обслуживанию

Страница: 56 / 87

Back to Contents Page
Speakers
Dell™ Inspiron™ 2600 and 2650
Removing the Speakers
Replacing the Speakers
Removing the Speakers
The speakers are located on the left and right corners of the front of the bottom case. Take note of the speaker cable routing so that you can replace the
cables properly under or between their routing clips.
1. Remove the hard drive .
2. Remove the floppy drive .
3. Remove the keyboard .
4. Remove the display assembly .
5. Remove the EMI shield .
6. Remove the video card .
7. Remove the palm rest .
8. Disconnect the speaker connector from the system board.
9. Remove the speaker cables from under or between their routing clips and die casting.
10. Remove the speakers by pulling them straight up and out of the bottom case.
NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed battery.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE: Read " Preparing to Work Inside the Computer " before performing the following procedure.
1 speaker connector 7 hard drive cage
2 routing clips (10) 8 left speaker cable
3 battery bay 9 left die casting
4 right speaker 10 left speaker
5 right speaker cable 11 floppy drive cage
6 right die casting
NOTICE: Remove the speaker cables from their routing clips and die casting with care to avoid damaging the cables.
NOTICE: Handle the speakers with care to avoid damaging them.