Dell Force10 Z9000, Справочное руководство

Страница: 962 / 1483

hello
Configure the rate at which the LLDP control packets are sent to its peer.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax hello seconds
To revert to the default, use the
no hello seconds
command.
Parameters
seconds Enter the rate, in seconds, at which the control packets are sent to its
peer. The rate is 5 to 180 seconds. The default is 30 seconds.
Defaults 30 seconds
Command Modes CONFIGURATION (conf-lldp) and INTERFACE (conf-if- interface -lldp)
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.7.1.0 Introduced on the S-Series.
Version 7.6.1.0 Introduced on the C-Series.
Version 7.4.1.0 Introduced on the E-Series.
mode
Set LLDP to receive or transmit.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax mode {tx | rx}
To return to the default, use the
no mode {tx | rx}
command.
Parameters
tx Enter the keyword
tx
to set the mode to transmit.
rx Enter the keyword
rx
to set the mode to receive.
Defaults Both transmit and receive.
Command Modes CONFIGURATION (conf-lldp) and INTERFACE (conf-if-
interface
-lldp)
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.7.1.0 Introduced on the S-Series.
962