Dell Force10 Z9000, Справочное руководство

Страница: 1187 / 1483

Version 8.2.1.0 Introduced on the C-Series and S-Series.
Usage
Information Guarantee a minimum bandwidth to different queues globally using the
service-class
bandwidth-weight
command from CONFIGURATION mode. The command is applied in
the same way as the
bandwidth-weight
command in an output QoS policy. The
bandwidth-weight
command in QOS-POLICY-OUT mode supersedes the
service-
class bandwidth-weight
command.
service-class dynamic dot1p
Honor all 802.1p markings on incoming switched traffic on an interface (from INTERFACE mode) or on all interfaces (from
CONFIGURATION mode). A CONFIGURATION mode entry supersedes an INTERFACE mode entries.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax service-class dynamic dot1p
To return to the default setting, use the
no service-class dynamic dot1p
command.
Defaults All dot1p traffic is mapped to Queue 0 unless you enable the
service-class dynamic
dot1p
command. The default mapping is as follows:
dot1p E-Series Queue ID C-Series Queue ID S-Series Queue ID
0 2 1 0
1 0 0 0
2 1 0 0
3 3 1 1
4 4 2 2
5 5 2 3
6 6 3 3
7 7 3 3
Command Modes
• INTERFACE
• CONFIGURATION (C-Series and S-Series only)
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Added the
kbps
option on the C-Series, E-Series, and S-Series.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
1187