Dell Force10 Z9000, Справочное руководство

Страница: 1013 / 1483

min-speed
min-
speed
(OPTIONAL) Enter the minimum link speed that ports must have to
receive the specified flooded multicast traffic.
Defaults none
Command Modes CONFIGURATION
Command History
Version 7.7.1.0 Introduced on the E-Series.
Usage
Information
When you use the
mac-flood-list
command with the
min-speed
option in combination
with the
restrict-flood
command, the
mac-flood-list
command has higher priority
than the restrict-flood command.
Therefore, all multicast frames matching the mac-address range specified using the
mac-
flood-list
command are flooded according to the
mac-flood-list
command. Only
the multicast frames not matching the mac-address range specified using the
mac-flood-
list
command are flooded according to the
restrict-flood
command.
Related
Commands restrict-flooding – prevents Layer 2 multicast traffic from being forwarded on ports below a
specified speed.
mtrace
Trace a multicast route from the source to the receiver.
E-Series
Syntax mtrace { source-address/hostname } { destination-address/hostname }
{ group-address }
Parameters
source-address/
hostname
Enter the source IP address in dotted decimal format (A.B.C.D).
destination-
address/
hostname
Enter the destination (receiver) IP address in dotted decimal format
(A.B.C.D).
group-address
Enter the multicast group address in dotted decimal format (A.B.C.D).
Command Modes EXEC Privilege
Command History
Version 7.5.1.0 Expanded to support originator.
Version 7.4.1.0 Expanded to support the intermediate (transit) router.
E-Series legacy
command
1013