Dell Force10 Z9000, Справочное руководство

Страница: 107 / 1483

enable
Enter EXEC Privilege mode or any other privilege level configured. After entering this command, you may need to enter a
password.
C-Series, E-Series, S-Series, Z-Series
Syntax enable [ level ]
Parameters
level (OPTIONAL) Enter a number for a privilege level of FTOS. Range: 0 to
15.
Defaults 15
Command Modes EXEC
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage
Information Users entering EXEC Privilege mode or any other configured privilege level can access
configuration commands. To protect against unauthorized access, use the
enable
password
command to configure a password for the
enable
command at a specific
privilege level. If no privilege level is specified, the default is privilege level 15.
Related
Commands enable password – configures a password for the
enable
command and to access a
privilege level.
enable optic-info-update interval
Enable polling intervals of optical information updates for simple network management protocol (SNMP).
Z-Series, S4810
Syntax enable optical-info-update interval seconds
To disable optical power information updates, use the
no enable optical-info-
update interval
command.
Parameters
interval
seconds
Enter the keyword
interval
followed by the polling interval in
seconds. Range: 120 to 6000 seconds. Default: 300 seconds (5
minutes).
107