Dell Force10 Z9000, Справочное руководство

Страница: 1063 / 1483

Use the max-metric router-lsa command to gracefully shut down or reload a router without
dropping packets destined for other networks.
NOTE: If you enter the max-metric router-lsa command without an option (on-startup
announce-time
or on-startup wait-for-bgp [
wait-time
]), the maximum metric of 65535 is
always announced in LSAs sent by the router.
Example
max-metric router-lsa
FTOS(conf)#router ospf 10
FTOS(conf-router_ospf)#log-adjacency-changes
FTOS(conf-router_ospf)#network 4.1.1.0/24 area 0
FTOS(conf-router_ospf)#network 1.1.1.0/24 area 1
FTOS(conf-router_ospf)#max-metric router-lsa on-startup wait-
for-bgp
FTOS(conf-router_ospf)#exit
FTOS(conf)#show ip ospf
Routing Process ospf 10 with ID 100.1.1.1 Virtual router
default-vrf
Supports only single TOS (TOS0) routes
It is an Area Border Router
Originating router lsas with maximum metric
Time remaining 00:07:07
Condition : On-Startup while BGP is converging for 600 secs.
State : Active
SPF schedule delay 5 secs, Hold time between two SPFs 10 secs
Convergence Level 0
Min LSA origination 5 secs, Min LSA arrival 1 secs
Number of area in this router is 2, normal 2 stub 0 nssa 0
Area BACKBONE (0)
Number of interface in this area is 1
SPF algorithm executed 3 times
Area ranges are
Area 1
Number of interface in this area is 1
SPF algorithm executed 3 times
Area ranges are
FTOS(conf)#show ip ospf database router
Exception Flag: Announcing maximum link costs
LS age: 198
Options: (No TOS-capability, DC)
LS Type: Router Links
Link State ID: 2.1.1.1
Advertising Router: 2.1.1.1
LS Seq Number: 80000005
Checksum: 0x9F5D
Length: 48
Number of Links: 2
maximum-paths
Enable the software to forward packets over multiple paths.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax maximum-paths number
To disable packet forwarding over multiple paths, use the
no maximum-paths
command.
1063