background image

NOTE: Using more than one interface at the same time may generate unexpected results.

Table 6. CMC Interfaces

Interface

Description

Web interface

Provides remote access to CMC using a graphical user interface. The Web 
interface is built into the CMC firmware and is accessed through the NIC interface 
from a supported Web browser on the management station.
For a list of supported Web browsers, see the Supported Browsers section in the 

Readme

 at dell.com/support/manuals.

Remote RACADM command line 
interface

Use this command line utility to manage CMC and its components. You can use 
remote or firmware RACADM:

Remote RACADM is a client utility that runs on a management station. It 

uses the out-of-band network interface to run RACADM commands on the 

managed system and uses the HTTPs channel. The 

–r

 option runs the 

RACADM command over a network.

Firmware RACADM is accessible by logging in to CMC using SSH or telnet. 

You can run the firmware RACADM commands without specifying the 

CMC IP, user name, or password. After you enter the RACADM prompt, 

you can directly run the commands without the racadm prefix.

Chassis LCD Panel

Use the LCD on the front panel to:

View alerts, CMC IP or MAC address, user programmable strings.

Set DHCP

Configure CMC static IP settings.

To reset CMC without rebooting the server, press and hold the System 

Identification 

 button for 16 seconds.

Telnet

Provides command line access to CMC through the network. The RACADM 
command line interface and the connect command, which is used to connect to 
the serial console of a server or IO module, are available from the CMC command 
line.

NOTE: Telnet is not a secure protocol and is disabled by default. Telnet 
transmits all data, including passwords in plain text. When transmitting 
sensitive information, use the SSH interface.

SSH

Use SSH to run RACADM commands. It provides the same capabilities as the 
Telnet console using an encrypted transport layer for higher security. The SSH 
service is enabled by default on CMC and can be disabled.

WS-MAN

The LC-Remote Services is based on the WS-Management protocol to do one-to-
many systems management tasks. You must use WS-MAN client such as WinRM 
client (Windows) or the OpenWSMAN client (Linux) to use the LC-Remote 
Services functionality. You can also use Power Shell and Python to script to the 
WS-MAN interface.
Web Services for Management (WS-Management) is a Simple Object Access 

Protocol (SOAP)–based protocol used for systems management. CMC uses WS–

Management to convey Distributed Management Task Force (DMTF) Common 

Information Model (CIM)–based management information. The CIM information 

31

Содержание Chassis Management Controller











































































































































































































































Отзывы: