Dell Chassis Management Controller Скачать руководство пользователя страница 179 | Manualshive

Страница: 179 / 234

Dell Chassis Management Controller Скачать руководство пользователя страница 179

If OSCAR is not open, move the mouse or press any key on the keyboard
The Main dialog box is displayed. Select a server in the list.

2.

Click Commands.
The Commands dialog box is displayed.

3.

Clear the Scan Enable option and click OK.

Broadcasting to Servers

You can simultaneously control more than one server in the system to make sure that all selected servers receive
identical input. You can choose to broadcast keystrokes and/or mouse movements independently:

•

Broadcasting keystrokes: When using keystrokes, the keyboard state must be identical for all servers receiving

a broadcast for the keystrokes to be interpreted identically. Specifically, the <Caps Lock> and <Num Lock>

modes must be the same on all keyboards. While the iKVM attempts to send keystrokes to the selected servers

simultaneously, some servers may inhibit and thereby delay the transmission

•

Broadcasting mouse movements: For the mouse to work accurately, all servers must have identical mouse

drivers, desktops (such as identically placed icons), and video resolutions. The mouse also must be in exactly

the same place on all screens. Since these conditions are extremely difficult to achieve, broadcasting mouse

movements to multiple servers may have unpredictable results.

NOTE: You can broadcast up to 16 servers at a time.

To broadcast to servers:

1.

Press <Print Screen>.
The Main dialog box is displayed.

2.

Click Setup and then Broadcast.
The Broadcast dialog box is displayed.

3.

Enable mouse and/or keyboard for the servers that are to receive the broadcast commands by selecting the boxes.
or
Press the up or down arrow keys to move the cursor to a target server. Then, press <Alt> <K> to select the
keyboard box and/or <Alt> <M to select the mouse box. Repeat for additional servers.

4.

Click OK to save the settings and return to the Setup dialog box.

5.

Click

or press <Escape> to return to the Main dialog box.

6.

Click Commands.
The Commands dialog box is displayed.

7.

Click the Broadcast Enable box to activate broadcasting.
The Broadcast Warning dialog box is displayed.

8.

Click OK to enable the broadcast. To cancel and return to the Commands dialog box, click

or press <Esc

9.

If broadcasting is enabled, type the information and/or perform the mouse movements you want to broadcast from

the management station. Only servers in the list are accessible.

Managing iKVM From CMC

You can do the following:

•

View iKVM status and properties

179

«
...
177
178
179
180
181
...
»

Содержание Chassis Management Controller











































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды