manualshive.com logo in svg

Dell Chassis Management Controller, Руководство пользователя

Поделиться
Скачать
Dell Chassis Management Controller Скачать руководство пользователя страница 149

Component

Minimum Required Version

FC Mezzanine card - Emulex LPe1105-
M4, FC8

BIOS 3.03a3 and firmware 2.72A2 or later

Server Module BIOS

•

PowerEdge M600 – BIOS 2.02 or later

•

PowerEdge M605 – BIOS 2.03 or later

•

PowerEdge M805

•

PowerEdge M905

•

PowerEdge M610

•

PowerEdge M710

•

PowerEdge M710hd

PowerEdgeM600/M605 LAN on 
motherboard (LOM)

•

Boot code firmware 4.4.1 or later

•

iSCSI boot firmware 2.7.11 or later

iDRAC

•

Version 1.50 or later for PowerEdge xx0x systems

•

Version 2.10 or later for PowerEdge xx1x systems

CMC

Version 1.10 or later

NOTE: Any system ordered after June 2008 has the correct firmware versions.

To make sure proper deployment of the FlexAddress feature, update the BIOS and the firmware in the following order:

1.

Update all mezzanine card firmware and BIOS.

2.

Update server module BIOS.

3.

Update iDRAC firmware on the server module.

4.

Update all CMC firmware in the chassis; if redundant CMCs are present, ensure both are updated.

5.

Insert the SD card into the passive module for a redundant CMC module system or into the single CMC module for a 

non-redundant system.

NOTE: If CMC firmware that supports FlexAddress (version 1.10 or later) is not installed, the feature is not 
activated.
See the 

Chassis Management Controller (CMC) Secure Digital (SD) Card Technical Specification

 document 

for SD card installation instructions.

NOTE: The SD card contains a FlexAddress feature. Data contained on the SD card is encrypted and may not 
be duplicated or altered in any way as it may inhibit system function and cause the system to malfunction.

NOTE: Your use of the SD card is limited to one chassis only. If you have multiple chassis, you must purchase 
additional SD cards.

Activation of the FlexAddress feature is automatic on restart of CMC with the SD feature card installed; this 
activation causes the feature to bind to the current chassis. If you have the SD card installed on the redundant 
CMC, activation of the FlexAddress feature does not occur until the redundant CMC is made active. See the 

Chassis 

Management Controller (CMC) Secure Digital (SD) Card Technical Specification

 document for information on how 

to make a redundant CMC active.
When CMC restarts, verify the activation process. For more information, see 

Verifying FlexAddress Activation

.

149

Содержание Chassis Management Controller











































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды