Dell 5100cn Скачать руководство пользователя страница 85

Страница: 85 / 298

The multipurpose feeder accepts print media within the following dimensions:

Width -- 88.9 mm to 220 mm

Length -- 139.7 mm to 355.6 mm

Loading the Multipurpose Feeder

In addition to plain paper, the multipurpose feeder can use various other sizes and types of print media such as

envelopes, and transparencies.

1. Gently pull open the multipurpose feeder cover, and pull out the extension tray.

2. Slide the width guides to the edge of the tray. The width guides should be fully extended.

3. Insert all media face down and top edge first into the multipurpose feeder.

NOTE:

Do not force the print media.

4. Slide the width guides until they rest lightly against the edge of the print media stack.

NOTE:

Be careful not to bend the print media.

Содержание 5100cn











































































































































































































































































































Результаты поиска

Содержание 5100cn

Отзывы:

Похожие инструкции для 5100cn

Бренды по названию

Популярные бренды

Dell 5100cn, Руководство пользователя

Результаты поиска

Содержание 5100cn

Отзывы:

Похожие инструкции для 5100cn

Бренды по названию

Популярные бренды