Dell 5100cn, Руководство пользователя

Страница: 247 / 298

To print with added options:
To print with the options, specify the option of the
lp
command using
-o
as follows.
The available options are the same as
txt2ps2/tiff2ps/xwd2ps2
.
Depending on installed options, the available paper trays are different.
%lp -d dell5100cn -o r -o ILT filename
To print using file format:
To print text files:
% lp -d dell5100cn filename
To print XWD files:
% lp -d dell5100cn -o XWD filename
To print TIFF format files:
% lp -d dell5100cn -o TIF filename
To print PostScript files:
% lp -d dell5100cn filename
To print PostScript files as text files:
% lp -d dell5100cn -o TX filename
However, for PostScript files with options set up, such as paper selection, etc., when the same option is specified, it
will be ignored.
txt2ps2 (Linux/Solaris/HP-UX)
Format
/usr/local/dellbin5100cn/txt2ps2 [-d] [-D] [-I tray-input
]
[-t] [-2] [-r] [-F] [-l lines ] [-w columns
]
[- ooutcolumns ] [-L outlines ] [-e n
]
[-s size ] [-E] [-f font ] [-Nc= copies ] [-cl] [-ps] [-
mg= up:bottom:right:left ] [-Hd= position:format:page ] [-Hf font ] [-MSI] [-M= type ] [-Mfo= mode ] [-Po n ] [-
St= mode ] [-sp] [-Sb] [-Cm= mode ] [-Pr= mode ] [-Cc= mode ] [-Gc= mode ] [-Sc= mode ] [-Gg= mode ] [-Ct] [-
Hld= PrintType:UserID:Password:DocumentName ] [ filename ...]
Function
Reads text, converts it to the PostScript language program, and writes to standard output. If the filename is not specified,
the standard input will be taken as the command input.
By typing character strings in the environmental variable
TXT2PS2OPTION
, the input of option at the command line can be
omitted.
At the environmental variable
TXT2PS2OPTION
and the command line, if no option is specified, the printer will output in 10-
point font size in the portrait orientation.
At the environmental variable
TXT2PS2OPTION
and the command line, if the same option is specified, the one specified at
the command line will prevail.
txt2ps2 outputs the PostScript language program that adjusts the line/column according to the paper size. For this reason,
the user need not be aware of the paper size. If there is an option to specify the line/column, automatic line feed
according to the paper size will not be executed. Printing will be output according to the line/column specified.
txt2ps2 interprets the following control codes. Other control codes/undefined codes will be converted to octal numbers and
output as-is.
LF
Line feed
FF
Form feed (modifiable by option)
TAB
8-column tab stop (modifiable by option)