Dell 5100cn Скачать руководство пользователя страница 239

Страница: 239 / 298

2. Delete the filters registered with the system. Delete the filters registered during the installation using the

lpfilter

command.

# lpfilter -f dell5100cn -x

(for Dell Laser Printer 5100cn)

# lpfilter -f download5100cn -x
# lpfilter -f postio5100cn -x
# lpfilter -f posttxt5100cn -x

3. Delete the symbolic files required to call up the filter.

Delete the following files from

/usr/lib/lp/postscript

dellposttxt5100cn
dellpostps5100cn
dellbinpath5100cn

4. Delete the interface program files of

Selected printer type name

from

/usr/lib/lp/model

Please also delete the interface program files of

Selected printer name

from

/etc/lp/interfaces

5. Delete all the directories that contain the UX filters and the files in these directories created during the installation.

The following directories must be deleted.

/usr/local/dellbin5100cn

6. Delete the filter description files. Delete the following files from

/etc/lp/fd

Filter description files for various printers.

dell5100cn.fd

(for Dell Laser Printer 5100cn)

download5100cn.fd
postio5100cn.fd
posttxt5100cn.fd

HP-UX

1. Delete the printer that was registered with the system. Use the

sam

command to delete the printer set up during

the installation.

# sam

2. Delete all the directories that contain the UX filters and the files in these directories created during the installation.

The following directories must be deleted.

/usr/local/dellbin5100cn

(directory specified during the installation)

Printing and Using the Utilities

Printing (Linux)

This section provides information on printing with the filter.

To print, specify the printer registered with

/etc/printcap

as the output destination.

Printing From Linux

To print to the default printer:

If the printer is registered as the default printer, the name of the printer can be shortened and specified as shown in

the following example.

% lpr

filename

Содержание 5100cn











































































































































































































































































































Результаты поиска

Содержание 5100cn

Отзывы:

Похожие инструкции для 5100cn

Бренды по названию

Популярные бренды

Dell 5100cn, Руководство пользователя

Результаты поиска

Содержание 5100cn

Отзывы:

Похожие инструкции для 5100cn

Бренды по названию

Популярные бренды