52
Default Settings
Loading default settings will restore all settings on your DVR to the default settings except for the date and
time. The default username is admin and the default password is 123456. To load default
follow these steps:
1. Click LOAD DEFAULT, a screen will appear.
2. Click the box for each function that will be
restored to default parameters or click ALL to
select them all. Click CLEAR to uncheck the boxes.
3. Select APPLY to continue.
4. A screen will appear asking "ALL SETTINGS WILL
BE LOST. RETURN TO DEFAULT SETTINGS?".
5. If you want to continue and restore the default
settings, select OK, if not, select cancel.
6. If you select OK, the DVR will take a few minutes
to load the default settings.
7. Once loaded, the DVR will reboot automatically
and the factory default settings will be set.
Shut Down
To SHUT DOWN the DVR:
1. Click SHUT DOWN.
2. A screen will appear asking for confirmation to
SHUTDOWN. Select OK to continue or cancel
to quit.
3. A message " YOU MAY NOW power off" will
appear. You can now UNPLUG the power supply
to the DVR.
Events Tab
The EVENTS tab allows you to choose which alarms you would like set, adjust the length of time the internal
buzzer will sound, as well as set email notifications. You can also have email alerts sent when motion is
detected. To turn on EVENT ALARMS follow these steps:
1. Click the box next to EVENT TYPE and select the
event that you want associated to a notification
(HDD Full, Disk Error and Video Loss).
2. Next, click Enable to activate the function.
Alarm Out:
This function is not applicable to this DVR.
Alarm Time:
This function is not applicable to this DVR.
Show Message:
When selected, a message will be
displayed on your monitor if an event occurs.
Buzzer:
Emits an audible alert from the DVR when
an event has occured. To set the buzzer length,
select the drop down box next to BUZZER and select
(10s,20s,40s,60s).
Send Email:
When selected, an email will be sent
to notify you that an event has occured. Please go
to Email Tab for instructions on how to set up email
notifications.
DEVICE SETUP
