Defender 21000 Series Скачать руководство пользователя

Страница: 30 / 79

REQUIREMENTS

You will need to have:

• DVR must be connected to a monitor/TV for

initial set up.

•  The DVR connected to a router.
•  The router connected to the Internet.
•  A PC or laptop that is connected to the same

router as the DVR. The PC can be connected by
a wired or wireless connection.

• Internet Explorer® (IE) 6.0 or higher (to check

your version of Internet Explorer® open IE. In
the top menu bar select HELP and then select
ABOUT INTERNET EXPLORER®. The version of IE
will be displayed).

• A genuine and fully-updated version of Windows

XP® Vista® or newer.

CONNECTING DVR TO A ROUTER

1. Power off the DVR by removing the power cable

from the back of the DVR.

2. Connect the included network cable to the

back of the DVR in the Ethernet port (LAN).

3. Connect the other end of the network cable to

an available port on the router.

4. Power on the DVR by reconnecting the power

cable to the back of the DVR.

Disclaimer:

Internet Explorer is a registered trademark of Microsoft

Corporation. Windows XP is a registered trademark of

Microsoft Corporation. Vista is a registered trademark of

Microsoft Corporation.

Note:

The computer and DVR need to be connected to the same

router for initial setup. A computer will not always be

necessary at the location to view the DVR.

NETWORK SETUP

Содержание 21000 Series
















































































Результаты поиска

Содержание 21000 Series

Отзывы:

Похожие инструкции для 21000 Series

Бренды по названию

Популярные бренды

Defender 21000 Series, Руководство пользователя

Результаты поиска

Содержание 21000 Series

Отзывы:

Похожие инструкции для 21000 Series

Бренды по названию

Популярные бренды