DeDietrich MCA Pro 115, Инструкция по установке и обслуживанию

Страница: 80 / 120

MCA Pro 45/65/90/115 MCA-Pro ISM Rv.4.1 2/2017
80
3x
...x
...x
2x
T000820-H
3x
...x
1. Press the two buttons simultaneously and then
[+] button until the symbol  flashes on the menu
bar.
2. Select the installers menu using the button.
c0de
appears on the display.
3. Use [-] or [+] button to input the installer code
0012
.
4. Confirm using button.
p
:
1
is displayed with
1
flashing.
5. Press the [+] button to go to parameter
p
:
17
.
6. Confirm using button.
7. Press the [+] button to increase the speed from
46
to, for example,
50
(see the graphs for the
associated heat output).
8 Confirm the value with the button.
9. Press the button 2 times to return to the
current operating mode.
5.7.5. Return to the factory settings
1. Press the two buttons simultaneously and then
[+] button until the symbol  flashes on the menu
bar.
2. Select the installers menu using the button.
c0de
appears on the display.
3. Use [-] or [+] button to input the installer code
0012
.
4. Confirm using button.
p
:
1
is displayed with
1
flashing.
5. Press the [+] button several times.
p
:
df
is
displayed with df flashing.
6 Press the button.
df
:x is displayed with
x
flashing. This is the current value of
X
for
dF
.
Check this against the value of
X
on the type
plate.
7. Enter the value of
X
shown on the type plate using
the [-] or [+] button.
8. Confirm the value with the button,
df
:
y
is
displayed with
y
flashing. This is the current value
of Y for
dU
. Check this against the value of
y
on
the type plate.
9. Enter the value of
y
shown on the type plate using
the [-] or [+] button.
10. Confirm the value with the button. The factory
settings are reset.
11. The display returns to the current operating mode.
5. Commissioning