DeDietrich MCA Pro 115 Скачать руководство пользователя страница 7

Страница: 7 / 120

MCA

Pro

45/65/90/115

MCA-Pro ISM Rv.4.1 2/2017

Safety Information and Codes

Boiler modification and spare parts

This boiler uses specific original manufactured parts.

The boiler must not be modified or non-OEM parts used

without the written approval from DDR Americas Inc.

Carbon monoxide

The installation of carbon monoxide detectors is highly

recommended by the U.S. Consumer Product Safety

Commission for buildings with gas burning equipment.

Sources of carbon monoxide include exhaust vents for

gas appliances or wood burning fireplaces that are not

properly vented, malfunctioning furnaces and exhaust

fumes from idling cars.

Carbon monoxide is a colourless and odourless gas

that is highly toxic. It can interfere with the delivery

of oxygen by the blood to the body. Exposure to low

levels of CO can cause headaches, confusion, nausea,

dizziness, fatigue, and shortness of breath. High level

exposure of CO can cause impaired vision, convulsions,

coma and possibly death.

Have a qualified service technician inspect the heating

equipment exhaust vent pipes and chimney flues on a

yearly basis.

In winter, inspect the exhaust vents for the dryer,

furnace, wood burning or gas stove, fireplace and heat

recovery ventilator to ensure they are not obstructed

by snow build-up.

Carbon monoxide detectors should be installed and

maintained in buildings that house gas burning

equipment. It is recommended to use a carbon

monoxide detector that is in compliance with a

nationally recognized standard such as ANSI/UL 2034-

2002 or CSA 6.19-01.

DANGER

Improper installation, adjustment, service, or

maintenance can cause flue products to flow into

living space. Flue products contain poisonous

carbon monoxide gas which can cause nausea or

asphyxiation resulting in severe personal injury or

loss of life.

Codes

Installation, servicing and maintenance of this product

must be performed by a licenced and trained heating

contractor, experienced in hot water heating boilers

as well as gas and oil combustion. The installation

must conform to all national and local codes having

jurisdiction:

•

In Canada, CSA B149.1 Gas Code

•

In USA, ANSI Z223.1 (NFPA 54) Gas Code, and

ASME CSD-1 Automatically Fired Boilers.

If you have any technical questions or need assistance

with this product, please call your local Sales

Representative or DDR Americas Inc.

Standards applied

We hereby certify that the series of appliances specified

hereinafter are in compliance with the latest standards

described, and that they are manufactured and

marketed in compliance with the requirements of the

following North American standards:

•

ASME Section IV

•

CSA B51

•

ANSI Z21.13-CSA 4.9 - Gas fired steam and hot

water boilers.

•

CAN/CGA 2.17-M91 - Gas fired appliances for use

at high altitude.

•

CGA P.2-1991 (R1999) - Testing method for

measuring annual fuel efficiencies or residential

furnaces and boilers.

•

CAN/CSA C22.2 No.0-M91 - General requirements -

Canadian electrical codes part II.

•

CSA C22.2 No.3-M1988 - Electrical features of fuel

burning equipment.

Содержание MCA Pro 115

























































































































Результаты поиска

Содержание MCA Pro 115

Отзывы:

DeDietrich MCA Pro 115, Инструкция по установке и обслуживанию, Страница: 7 / 120

Результаты поиска

Содержание MCA Pro 115

Отзывы: