12
Rear Panel
The rear panel of the SE-1000 looks something like this:
Each section of the panel is clearly labelled, but here is a detailed overview.
20
HD/SD SDI Signal Inputs (Digital Inputs 1 to 5). Each input has a loop through output adjacent to it.
IN = Input OUT = Loop through Output
21
DVI-I Signal Input (Digital Input 6)
22
HD/SD SDI Digital PGM (Program) Output Connecters (PGM 1 & PGM 2)
23
HD/SD SDI Digital PVW (Preview) Output Connecter (PVW)
24
HD/SD SDI Digital AUX (Auxiliary) Output Connecters (AUX 1 & AUX 2)
25
HD/SD YUV Component Analogue PGM (Program) Output Connecters (PGM 1)
26
HD/SD YUV Component Analogue PVW (Preview) Output Connecters (PVW)
27
HD/SD YUV Component Analogue AUX (Auxiliary) Output Connecters (AUX 1)
28
Ethernet 10/100 Port. This is used for importing still images from, and exporting still images to a PC.
29
GPI Port (General Purpose Interface). The GPI port allows simple contact closure control of the
AUTO Take button (
10
). Each time a contact closure is executed the SE-1000 will automatically
perform the designated transition.
30
Ground / Earth Terminal. When connecting the SE-1000 to any other component, make sure that it is
properly grounded by connecting this terminal to an appropriate point. When connecting, use the
socket and be sure to use wire with a cross-sectional area of at least 1.0 mm2.
