24
Menu 13/15
DVI Phase / Position Settings
Press the [FUNC] button, so that it is illuminated, and then press the [SET UP] button, so that it is also
illuminated.
Rotate Adjustment Knob F1 until DVIPH 13/15 is displayed.
Rotate Adjustment Knob F2 to adjust the clock/phase of the analogue DVI input, try to minimise any noise in
the image.
Rotate Adjustment Knob F3 to alter the horizontal position (HPOS) of the DVI input.
Rotate Adjustment Knob F4 to alter the vertical position (VPOS) of the DVI input.
To leave the menu press the [FUNC] button so that it is no longer illuminated.
Menu 14/15
INIT
Initialise SE-1000
Init will return the SE-1000 to its factory default settings.
Press the [FUNC] button, so that it is illuminated, and then press the [SET UP] button, so that it is also
illuminated.
Rotate Adjustment Knob F1 until INIT 14/15 is displayed.
To reset the SE-1000 to factory default:
Press Adjustment Knob F2.
If you are certain that you want to continue, rotate Adjustment Knob F2 so that No changes to Yes, then
press Adjustment Knob F2 to confirm.
The SE-1000 will reset itself to default settings.
