56
Connecting the SE-1000 to a PC
The SE-1000 can either be connected directly to a PC or it can be connected via a hub.
If the SE-1000 is connected directly to a PC you must use a LAN crossover cable, if it is connected via a hub
then use a straight LAN cable.
Setting the IP Address
To communicate with the SE-1000 you will need to set an appropriate IP address. The default IP address of
the SE-1000 is 192.168.0.10, if you have changed the settings then you will need to use your own values.
All PCs are slightly different but as a rough guide your PC should like something like this. If you are unsure of
how to set your PC up it would best to consult your PC supplier.
To set your PCs network TCP/IP settings to work with the SE-1000 open up Control Panel on your PC and
choose “Network Connections”.
Right click on the Local Area Connection and select Properties from the drop down list.
The “Local Area Connection Properties” Window should open. Highlight “Internet Protocol (TCP/IP)” and
then click on “Properties”
