14
Set Up
The SE-1000 is set up via various menus, which are displayed on the two LCD panels. The main LCD panel
(
15
) displays all of the system settings, with the exception of the Format /Standard Converter Settings which
are displayed in the DAC-40 LCD panel (
14
).
Main LCD Panel
DAC-40 LCD Panel
Once accessed each menu is adjusted by using the Adjustment Knobs F1 to F4 (
12
), or, in the case of the
DAC-40 Format / Standard Converter, by using the Format / Standard Converter Control Knob (
13
).
Adjustment Knobs F1 to F4
Format / Standard
Converter Adjustment
Knob
We will start by looking at the various menus that are displayed on the main LCD panel.
Powering Up
Using the supplied power cord, connect the 12V 10A power supply to a suitable mains outlet, and then
connect the power supply DC out to the DC IN Socket (
31
) on the rear of the SE-1000.
Now switch the Power On / Off Switch (
1
) to the “I” position.
As the SE-1000 boots up the Main LCD panel will briefly show the SE-1000 version number, it is worth
making a note of this.
Once the SE-1000 has finished booting up you will see an information panel displayed on the LCD.
The display may vary but will be similar to the example above. At this stage parameters cannot be changed,
the display is information only.
