13
31
DC Power In Socket. Connect the supplied 12V 10A switch mode power supply to this socket.
N.B. If you intend to use an alternative 12v DC supply, ensure that it is /- 2V and has a
current of 5 A or more.
32
Tally Out Socket. This supplies tally light information for up to six devices. Please refer to the section
External Interfaces
for more details.
33
RS-422 Input Socket. The SE-1000 can be controlled from external devices via the RS-422 socket.
Please refer to the section
External Interfaces
for more details.
34
External Reference Input and BB Output Connecters (REF). An external sync signal can be fed into
the SE-1000 via the REF In port. The external signal is looped through, so that it may be fed into
other devices.
When the SE-1000 is set to Internal Sync Mode (INT) both REF ports supply BB outputs, so that
other devices can be synced to the SE-1000
35
HD/SD SDI Format/Standard Converter (DAC-40) Inputs (1 to 6). The SE-1000 has six built in
format/standard converters. Each converter can be fed an HD/SD SDI Digital signal, which will then
be converted into an HD/SD YUV or Composite Analogue signal. Please refer to the section
Format
Standard Converters
in
Set Up
for more details.
36
Analogue CV / HD/SD YUV Component Format/Standard Converter (DAC-40) Output Connecters.
These are the output connections for the six built in DAC-40 converters. Please refer to the section
Format Standard Converters
in
Set Up
for more details.
