25
Menu 15/15
STATS
Alarm Info. / Ver No.
The STATS display gives information about alarm events and SE-1000 firmware version number; there are
no adjustments to be made.
Press the [FUNC] button, so that it is illuminated, and then press the [SET UP] button, so that it is also
illuminated.
Rotate Adjustment Knob F1 until STATS 15/15 is displayed.
ALM
If the alarm LED has illuminated on the SE-1000, you should check this menu to see the cause, this
could be the fan, a power fluctuation or both fan and power (F P).
OPT
(is not used on this model)
VER
displays the version number, which you will be required to know if you contact technical support.
To leave the menu press the [FUNC] button so that it is no longer illuminated.
XPT Menus
Setting The Crosspoints
Crosspoint assignments determine which signal is routed to which button. The settings that you can see
below are the default settings. You can choose to route the signals in whatever way you like.
Menu 1/3
XPTAS
Crosspoint Assignments
The XPTAS display gives information about crosspoint assignments; there are no adjustments to be made.
To make adjustments you need to go into
XPTAS Menu 2/3.
Press the [FUNC] button, so that it is illuminated, and then press the [XPT] button, so that it is also
illuminated.
Rotate Adjustment Knob F1 until XPTAS 1/3 is displayed.
The display indicates that:
1
is set to black
2
is set to input 1
3
is set to input 2
4
is set to input 3
5
is set to input 4
6
is set to input 5
7
is set to DVI (input 6)
Other options that may be displayed are:
G
-
Colour Background
C
-
Colour Bars
F
-
FMEM
To leave the menu press the [FUNC] button so that it is no longer illuminated.
