Datasat XD20, Инструкция по установке и эксплуатации

Страница: 34 / 254

XD20 Installation and Operating Guide Version 1.1
Document # 9301H264001.1 20
2.7. XD20 Indicators and Display for Video
The Video LED is lit whenever the XD20 is in process of playing a video playlist or video test content.
The Audio LED is lit whenever the Video playlist is currently playing audio. The XD20 pulses the
cinema processor to the DTS format when the Audio LED goes on. The XD20 pulses the cinema
processor to a specified Silent audio format or the end of the Preshow video when the XD20 Audio LED
goes off.
2.7.1. Video LCD Display
The XD20 front display shows the current status during the video playback. It is possible to enter the
XD20 menus and make adjustments while the video is playing.
Note that any changes made with playlist automation setup menus do not take affect until the
next playlist starts.
2.7.2. Projector Warming Up Display
The XD20 sends the Projector On command (to the video projector) as soon as the playlist starts. Then, it
waits for the video start delay period before displaying any video. The following shows the display during
that period.
2.7.3. Display when Playing Playlist
The following appears on the XD20 front display when the XD20 is playing video:
Display terms:
Playlist Name Name for the current playlist. The Playlist Name is assigned in the video
configuration file.
Segment Name The name of the current playlist segment. The Segment Name is assigned
in the video configuration file.
XX of YY XX is the current segment number, while YY is the total number of
segments in the current playlist.
Fmt: (Format) Identifies the XD20 format pin selected by the XD20 or by an external
automation system.
The following display text appears during the video playback when the XD20 is switching audio decoder
formats (internal to XD20):
The following text displays briefly when the playlist is ending or has been stopped. Following this, the
display returns to its normal state.